|
|
|
 The IBAU ROTARY FEEDER
The IBAU ROTARY FEEDER is not just another rotary feeder. It sure is different. When looking at the cut away drawing you can see the difference. Slots are cut into the heavy rotor for the strong, reinforced and flexible blades. These flexible blades bend a little, when discharging and dosing conveying good. When reaching the lower part of the feederbody, the blades will return into the normal position. There is a bar crossing the discharge opening. Each blade passing this bar will be bent slightly and spring back. Conveying good which still is sticking at the blades will be thrown off.
Simple maintenance: If necessary the wear resistant blades can be exchanged comparativily easy, without to remove the feeder. After closing the cut off gate above the feeder, a little cover plate as a part of the sideplate has to be removed. With the aid of an appliance the blades can be exchanged. |
